Forum and Costume Controls
REMINDER: Do not change your e-mail address yourself. Please read this first
|Viewing costume :: Battle Rey
Active Legion Member
German Base Yavin
Undershirt: A handmade cotton-blend
shirt that has a V-neck crossover in the
front, no sleeves. The arm holes and
front crossovers are finished off with a
blanket stitch. The bottom is
unfinished. The shirt is tea-dyed to get
an off-white color.
Tunic: The tunic is made from a grey
cotton blanket with a raised diamond-
shaped pattern. It was dyed with RIT
frost-gray and chocolate-brown to get
Rey's SA tunic color. The tunic is lined
with a brown cotton fabric. In the back
is the SA yoke.
Obi: The obi is made from white linen,
dyed with RIT charcoal to get it's grey
color. It is self-scrunching and closes
with three hidden snaps in the back.
Tabards: The tabards are made from
thin grey cotton gauze. It wraps right
over left, is longer in the front than the
back and is gathered at the shoulders.
Hair: Hair is shoulder-lenght and worn
half open, half two high ponytails.
There is about 4-5cm of space in
between the ponytails.
Belt: The belt is made from natural
leather and was dyed with Fiebing's
Leather Oil. The upper belt is about 2
inch wide and the lower belt about 1.5
inch. It is secured with two rectangular
metal rings and next to each is a
double x-stitch detail. The yarn is
made from hemp.
Pants: A pair of modified light-grey
jeans. It had two seam darts on each
side of the knee and a wrapping seam
at the top of the knee and a straight
seam at or just below the knee.
Arm Wraps: The arm wraps are BOOTS
cotton gauze bandages that were
weathered to get darker edges.
Bracer:Was made from the same
leather than the belt and dyed with the
Boots: The boots are the SA Po-Zus.
Holster: The holster was made from
the same leather as the bracer and
belt. It has two decorative rivets as
well as decorative stitching around the
Lightsaber: A blue-bladed Master's
Replica, it has the Skywalker graflex as
it was Anakin's lightsaber.