Forum and Costume Controls

   FAQFAQ  SearchSearch  MemberlistMemberlist   UsergroupsUsergroups  medals.php?sid=5b743b441751ed33f0a9a4f8d5ba0158Medals   RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in

       
REMINDER: Do not change your e-mail address yourself. Please read this first for why.

[New] Temple Guard - Rebels D

 
Post new topic   Reply to topic    Rebel Legion Forum Index -> Costume and Prop Making -> Jedi -> KJO Standards Development -> KJO Standards Archive
View previous topic :: View next topic  
Author Message
Uscgguardian (Matthew Creech)
Active Legion Member


Joined: 20 Oct 2015
Posts: 67

Medals: None

PostPosted: Sat Jun 09, 2018 9:21 pm    Post subject: [New] Temple Guard - Rebels D Reply with quote

Open for changes and comments until:
24 June 2018

Leroni

OK guys here is my proposal for my Rebels Star Wars Temple Guard. Leroni XO from KJO, is given credit for helping me write this.

Quote:

Standard Name: Temple Guard - Rebels
Primary Detachment: KJO
Submission Date: 24 / 06 / 2018
Existing Standard URL:

Front Image:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/GRNA12.jpg
Source: Movie - Rebels

Back / Second View Image
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/4.jpg
Source: Movie - Rebels

Character Description


Required Items

Mask:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/mask1.jpg
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/Mask2.jpg
Required Details:
    - White Mask with gold design made of hard material (plastic, metal, etc…)
    - The mask has round ear-cups with eight small gold squares painted on the cup itself in a circular pattern on the edge of the ear-cups
    - On the back of the mask there is light grey cloth covering, in three pieces with visible black seams.
    - At the base of the neck there is fixed a white cloth that attaches to the bottom of the grey cloth.
    - The back of the head to the base of the skull must be fully covered. To cover the neck, a black balaclava or similar has to be worn.
    - The mask has no signs of weathering, no cracks, dents or visible signs of construction.
    - No skin or hair is visible
    - The eyes are not visible within the mask.


Inner Tunic:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/1.jpg
Required Details:
    - Light grey fitting tunic
    - High grey collar with a white collar edging.
    - The seam between the white edging and the grey tunic collar is black and highly visible
    - The collar must go to mid-neck and be tight.
    - The closure of the collar is left over right.
    - Looks like it closes at the shoulder.
    - No sleeves are needed. Dickies will not be allowed.


Outer Tunic:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/3.jpg
Required Details:
    - Light grey material with white stripes.
    - Tight fit, with long tight sleeves.
    - The closure of the tunic must be very low near to the belly button so that it forms a small triangle pointing down just below the breast plate
    - The inner tunic is visible within this triangle
    - At the middle of the back of the tunic there is a visible black seam.
    - No pin striping material


Breast plate:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/2.jpg
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/5.jpg
Required Details:
    - White breast plate made of hard material (plastic, metal, etc.)
    - Molded to the body, so that there are no signs of gaps at the shoulders or other areas.
    - Gold design pattern on the front and back.
    - Grey painted edging with a black line between gray and white.
    - Smooth with no signs of construction or damage
    - No signs of weathering


Shoulder Armor:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/shoulder-armor1.jpg
Required Details:
    - White shoulder armor made of hard material (plastic, metal, etc.)
    - It is molded to the shape of the upper arm – bent.
    - The edges of the armor are bent outwards. Smooth with no signs of ripples and are marked by a black line.
    - Golden Jedi Temple Guard Symbol painted just below the center of the armor
    - If fixed with an elastic strap, the strap need to be in grey.
    - No signs of weathering.


Hip Armor:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/hiparmor1.jpg
Required Details:
    - White, two layers hip armor made of hard material (plastic, metal, etc.)
    - Form fitting to the waist and hip with slight form fitting to upper portion of the leg.
    - Separated on each hip and must be placed accurate.
    - Upper layer is curved on the top and reaches outward over the belt.
    - Upper layer is wider below the belt and narrower above the belt.
    - Each bottom corner of the lower layer is marked with a small golden pattern design.
    - Hip armor will be held on with the belt.

Optional Details:
    - Lower layer of the hip armor made out of heavy leather.


Bracers:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/bracers-handplates.jpg
Required Details:
    - Light grey bracers are made of hard material (plastic, metal, etc.)
    - Bracers are round, start at the wrist and end on the top just below the bend of the elbow. At mid forearm they end on the bottom.
    - Two darker grey horizontal strips are attached to the top.
    - Strips have pointed tips on both ends.
    - Bracers can come in a claim shell two piece. Pieces must be mounted tightly together with no visible seam, closures, or snaps.


Hand Plates:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/bracers-handplates.jpg
Required Details:
    - Light grey hand plates are made of hard material (plastic, metal, etc.)
    - Hand plates should match the color of tunic, gloves, bracers and pants.
    - They cover the entire top of the hand and wrist, starting at the knuckles and ending just above the bracers on the wrist.
    - The form of the hand plates is a light trapeze shape
    - They are attached to the gloves with no signs of straps or elastic.


Gloves:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/bracers-handplates.jpg
Required Details:
    - Light grey leather or leather like material gloves.
    - Tight fitting to the wearer
    - Plain design with no visible sing of decoration


Belt:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/Rebels_Season_Two_-_Mid-Season_31.png
Required Details:
    - Light grey, wide, leather or leather like material belt.
    - 2 small strips of leather placed on the belt to create grooves.
    - The lower portion of the belt is black with the strips of the outer layer light grey

Optional Details:
    - One single belt with grooves placed on the single leather piece.
    - Grooves must be black in color.


Buckle:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/Rebels_Season_Two_-_Mid-Season_31.png
Required Details:
    - The pattern of the belt buckle at the front must be accurate.
    - The buckle is made from metal, plastic type material, or similar.
    - The closure is not visible


Saber clip:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/covertec.jpg
Required Details:
    - Golden saber clip placed on the left side of the belt.
    - The attachment must be hidden


Pants:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/GRNA12.jpg
Required Details:
    - Light grey, straight cut pants
    - Highly visible black rectangle seam in the front of the pants.
    - No material arts or baggy pants


Boots:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/beinschienen.jpg
Required Details:
    - Light grey, leather or leather like material ankle boots.
    - Round toe with two black small stripes at the top of the boots, where the toe bends
    - No visible pulls or elastic closure
    - Zippers on the inside of the boots are allowed

Optional Details:
    - Knee high boots with the same features are allowed


Shin Armor:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/beinschienen.jpg
Required Details:
    - Round Grey shin armor is made of hard material (plastic, metal, etc.).
    - Tight with a visible black line with two small squares in the front. Outlining the shin bone continuing to the back of the leg and stopping at the front again.
    -Armor may come in a two piece claim shell design but must be mounted tightly together.
    - No visible seams, no taps or spacing on the top.

Optional Details:
    - There can be indentions in the back of the calves for screen accuracy.


Lightsaber:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/lightsaber.jpg
Required Details:
    - Accurat SW-Rebels Temple Guard saber.
    - Double or single blades
    - If bladed blades have to be yellow
    - Made out of hard material (plastic, metal, etc.)

Optional Details:
    - Folding configuration, not required to be operable
    - Saber may fold in half with optional sound
    - Other Sabers may be modified to resemble the saber itself


Costume Resources:
- Reference Photo Gallery - http://www.kjo.rebellegion.com/?portfolio=temple-guard-rebels


changed as requested - Leroni
_________________
Try to fight and you will fail. The rebellion will be destroyed. You will die and your apprentice will be come a servant of evil.
Back to top
View user's profile Send private message Send e-mail
Uscgguardian (Matthew Creech)
Active Legion Member


Joined: 20 Oct 2015
Posts: 67

Medals: None

PostPosted: Sat Jun 09, 2018 9:23 pm    Post subject: Star Wars Rebels Temple Guard Reply with quote

OK guys here is what I have been working on for the last month.
_________________
Try to fight and you will fail. The rebellion will be destroyed. You will die and your apprentice will be come a servant of evil.
Back to top
View user's profile Send private message Send e-mail
Rellan ()
Active Legion Member


Joined: 11 Jul 2015
Posts: 87

Medals: None

PostPosted: Thu Jun 14, 2018 1:03 am    Post subject: Reply with quote

I love this. I have been working on this costume for about year. So far this pretty accurate with what i have gathered from the pictures.

One thing that might need to be adjusted will be the hard parts to the armor, namely the Shins and Chest plate.

This is a problem going from animated to real life. Animated characters do not have to remove the armor. Therefore parts of it can be seamless. In real life, this is just not practical. I will use clones as an example here. Parts of the animated clone armor is seamless but we have made exceptions to allow seems in certain areas to allow for a real person to get in and out of the armor.

Having attempted to make this armor fit the way it does in the show is extremely difficult. The closest i have come with the shins is to use a two-piece design that has elastic on the inside. The black line seen going around is actually 2 pieces. the elastic stretches to allow someone's foot to be inserted and the elastic brings it back to one solid piece. This way the armor fits tight to the shin. I believe clone shines are clamshell design even though in the show this is one solid piece. (i may be mistaken)

The chest plate is odd because the slot for the head needs to be big enough to get through but usually, by this time, there will be some gaps once its on the body. I am not sure how this could be made as one solid piece and still allow a normal human to don this armor and achieve the necessary look. I've wasted a lot of plastic attempting this. Perhaps allowing a seam at one of the shoulders or even splitting the armor in half at the shoulders and clam shelling back together ( example: Green/White ranger in Power Rangers chest armor) could be allowed to achieve the wanted look.
_________________
Back to top
View user's profile Send private message
Uscgguardian (Matthew Creech)
Active Legion Member


Joined: 20 Oct 2015
Posts: 67

Medals: None

PostPosted: Thu Jun 14, 2018 2:13 am    Post subject: Rebels Temple Guard Reply with quote

Hey brother,

What I means as " Seamless" I totally agreed that the animated cannot fit into the real world. However, the meaning behind seamless is simply that it does not have to be a solid piece but more a two piece WITHOUT A visible seam. This can easily been seen in storm trooper armor as well as clones in shin and leg armor. Their armor is also two pieces, however, you do not see any visible seams where it is closed. This can also go with Mando gauntlest. Many of them, such as Boba Fett cannot be seen with hinge marks or seams, and the closing have to be seamless. So it can be done.

With the Shin armor I understand. However this is the reason why we put the black line around the shin. In the animated version, it's actually an indention mark within the calve. However, the only way to fix this is to 3d print, which is what I am doing. But for a basic approval we are allowing just the black line. But you have to show no seams. Your seam can be to the inside of your leg, or barely visible, but no seam can be seen. I believe to what your design states, as long as I can't see a seam you're good to go.

With the chest armor, I have seen it done with one piece. This was the inspiration for me making this costume. This can easily be done using PVC SIntra or Forrex, heating it up and molding it to your body. IF you wish to construct yours in two pieces please be my guest. However, the goal is to be screen accurate, which it is clear in the show there are no seams at the top of the armor. However, if there is a light seam, where it cannot be seen, or you wish to construct it two pieces and glue it together, bondo the seam, and sand it, please do so. There is always another way to skin a cat.
_________________
Try to fight and you will fail. The rebellion will be destroyed. You will die and your apprentice will be come a servant of evil.
Back to top
View user's profile Send private message Send e-mail
Uscgguardian (Matthew Creech)
Active Legion Member


Joined: 20 Oct 2015
Posts: 67

Medals: None

PostPosted: Thu Jun 14, 2018 2:23 am    Post subject: Rebels Temple Guard Reply with quote

Rellan,


I took a look at your profile too. With your jedi general, the way you have your gauntlets constructed . there is no visible seam. I don't quite know how you have put them on. But I can't see a seam at all. This is the meaning as seamless.
_________________
Try to fight and you will fail. The rebellion will be destroyed. You will die and your apprentice will be come a servant of evil.
Back to top
View user's profile Send private message Send e-mail
Uscgguardian (Matthew Creech)
Active Legion Member


Joined: 20 Oct 2015
Posts: 67

Medals: None

PostPosted: Thu Jun 14, 2018 2:34 am    Post subject: Rebels Temple Guard Reply with quote

Here is where I took inspiration from.

Although there is some much improvement that needs to be done to Niels costume, it does come very close.


http://www.forum.rebellegion.com/forum/viewtopic.php?p=900329&sid=b8fd082d9c1844fbb73a1f43539fdc84
_________________
Try to fight and you will fail. The rebellion will be destroyed. You will die and your apprentice will be come a servant of evil.
Back to top
View user's profile Send private message Send e-mail
Leroni (Leroni)
Lothal Base CO
Lothal Base CO


Joined: 23 Feb 2014
Posts: 2547
Location: Lothal Base
Medals: 2 (View more...)
Celebration Europe 3 (Amount: 1)

PostPosted: Fri Jun 15, 2018 9:16 am    Post subject: Reply with quote

Added links to pictures and implemented the suggested changes.

yours
Leroni
_________________
KJO DMO 2018-2019
KJO DXO 2016-2018
LCJ Support Staff 2016/2017
KJO DMerchOr 2015/2016
Wretched Hive DMerchO 2014/2015
Twilek - Saga

Back to top
View user's profile Send private message Send e-mail Visit poster's website
Leroni (Leroni)
Lothal Base CO
Lothal Base CO


Joined: 23 Feb 2014
Posts: 2547
Location: Lothal Base
Medals: 2 (View more...)
Rebel Legion Supporter (Amount: 1)

PostPosted: Mon Oct 15, 2018 10:10 am    Post subject: Reply with quote

German Version

Quote:

Standard Name: Temple Guard - Rebels
Primäres Detachment: KJO
Übermittlungsdatum: 24 / 06 / 2018
Existierende Standard URL:

Front Bild:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/GRNA12.jpg
Quelle: Movie - Rebels

Rückansicht / Zweite Ansicht:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/4.jpg
Quelle: Movie - Rebels

Charakterbeschreibung
Die Jedi Tempelwache sind vom Jedi-Orden unterhaltene Sicherheitskräfte, die den Schutz des Jedi Tempels zur Aufgabe haben.

Benötigte Gegenstände

Maske:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/mask1.jpg
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/Mask2.jpg
Benötigte Details:
    - Weiße Maske mit goldenem Desig, aus hartem Material (Plastik, Metall, etc...)
    - Die Maske hat runde Ohrabdeckungen mit acht smalen goldenen rechtecken, die auf die Abdeckung gezeichnet sind. In einem runden Muster an den Kanten der Ohrabdeckungen.
    - Am Hinterkopf hat die Maske eine Abdeckung aus grauem Stoff, der aus drei Stücken besteht und stark sichtbare schwarze Nähte hat.
    - Unten am Nacken ist quer ein weisses Stück Stoff befestigt.
    - Der Kopf und Hals müssen vollkommen bedeckt sein. Um den Nacken zu bedecken ist empfiehlt sich eine Kapuzenmütze (Sturmhaube).
    - Die Maske ist makellos und hat keine sichtbaren Schrammen, Verschmutzungen oder aber auch Merkmale der Konstruktion.
    - Es sind weder Haut noch Haare sichtbar.
    - Die Augen sind unter der Maske nicht sichtbar.


Innere Tunika:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/1.jpg
Benötigte Details:
    - Hellgraue anliegende Tunika.
    - Hoher grauer Kragen mit einer weißen Umrandung.
    - Die Naht zwischen der weißen Umrandung und dem grauen Kragen der Tunika ist schwarz und gut sichtbar.
    - Der Kragen muss bis zur Hälfte des Nackens reichen und eng anliegend sein.
    - Der Kragen wird "links über rechts" geschlossen.
    - Es hat so auszusehen, dass die Tunika an der Schulter geschlossen wird.
    - Ärmel sind nicht benötigt. Dickies sind nicht erlaubt.


Äußere Tunika:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/3.jpg
Benötigte Details:
    - Hellgrauer Stoff mit weißen Streifen.
    - Anliegend, mit langen anliegenden Ärmeln.
    - Der Verschluss der Tunika muss nahe dem Nabel liegen, damit ein kleines Dreieck, unterhalb der Brustplatte, gebildet wird.
    - Die innere Tunika ist in diesem Dreieck sichtbar.
    - In der Mitte des Rückens ist eine schwarze Naht sichtbar.
    - Kein "Nadelstreif" Stoff.


Brustplatte:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/2.jpg
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/5.jpg
Benötigte Details:
    - Weiße Brustplatte aus hartem Material (Plastik, Metall, etc..)
    - An den Körper angepasst, sodass keine Spalte an den Schultern oder in anderen Bereichen sichtbar sind.
    - Goldene Verziehrungen vorne und hinten.
    - Gemalte, graue Umrandung mit einer schwarzen Linie zwischen dem Grau und Weiß.
    - Glatt ohne Zeichen der Konstruction oder eines Schadens.
    - Keine Anzeichen von Verwitterung.


Schulterrüstung:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/shoulder-armor1.jpg
Benötigte Details:
    - Weiße Schulterrüstung aus hartem Material (Plastik, Metall, etc...)
    - Sie ist an die Form des Oberarms angepasst - gebogen.
    - Die Kanten der Rüstung sind nach außen gebogen. Glatt ohne Anzeichen von Wellen und sie sind durch eine schwarze Linie markiert.
    - Goldenes Jedi-Tempelwächter-Symbol, das direkt unterhalb der Mitte der Rüstung angebracht wird.
    - Wenn mit sie einem elastischen Band befestigt wird, muss das Band grau sein.
    - Keine Anzeichen von Verwitterung.


Hüftpanzerung:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/hiparmor1.jpg
Benötigte Details:
    - Weiße, zweilagige Hüftpanzerung aus hartem Material (Plastik, Metall, etc...)
    - Die Form ist an Taille und Hüfte angepasst. Eine leichte Formanpassung ist auch an den Oberschenkeln zu sehen.
    - Getrennt auf jeder Hüfte und muss genau platziert werden.
    - Die obere Lage ist oben gekrümmt und erstreckt sich über den Gürtel nach außen.
    - Sie ist breiter unter dem Gürtel und schmaler über dem Gürtel.
    - Jede untere Ecke der unteren Lage ist mit einem kleinen goldenen Muster verziehrt.
    - Die Hüftpanzerung wird mit dem Gürtel gehalten.

Optionale Details:
    - Die untere Lage der Hüftpanzerung kann aus schwerem Leder hergestellt werden.


Armschienen:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/bracers-handplates.jpg
Benötigte Details:
    - Hellgraue Armschienen aus hartem Material (Plastik, Metall, etc...)
    - Die Armschienen sind rund, beginnen am Handgelenk und enden innen kurz unterhalb der Armbeuge. Außen enden Sie am Ellenbogen.
    - Zwei horizontale Streifen in dunklerem Grau sind oben an der Armschiene befestigt.
    - Die Streifen haben spitz zulaufende Enden auf beiden Seiten.
    - Die Armschienen können aus zwei Schalen gemacht sein. Die Teile müssen nahtlos zusammengefügt sein, keine sichtbaren Verschlüsse, keine Naht


Handschutz:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/bracers-handplates.jpg
Benötigte Details:
    - Hellgrauer Handschutz aus hartem Material (Plastik, Metall, etc...)
    - Sie bedecken den gesamten Handrücken und das Handgelenk, beginnen an den Knöcheln und enden unter der Armschiene am Handgelenk.
    - Der Handschutz ist trapezförmig.
    - Er ist an den Handschuhen ohne sichtbaren Streifen oder elastischen Bändern fixiert.


Handschuhe:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/bracers-handplates.jpg
Benötigte Details:
    - Hellgraue Leder oder Kunstleder Handschuhe.
    - Eng anliegend.
    - Glatt, ohne sichbare Verziehrungen.


Gürtel:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/Rebels_Season_Two_-_Mid-Season_31.png
Benötigte Details:
    - Dunkelgrauer, weiter Leder- oder Kunstledergürtel.
    - Zwei schmale Lederstreifen sind am Gürtel fixiert um Rillen zu erzeugen.
    - Der untere Teil des Gürtels ist schwarz, mit den Streifen der zweiten Schicht die grau ist.

Optionale Details:
    - Ein einzelner Gürtel mit Rillen auf einem Lederstück plaziert.
    - Die Rillen müssen schwarz sein.


Gürtelschnalle:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/Rebels_Season_Two_-_Mid-Season_31.png
Benötigte Details:
    - Das Aussehen der Gürtelschnalle vorne muss akkurat sein.
    - Die Gürtelschnalle kann aus Metall, Plastik, oder ähnlichem Material sein.
    - Der Verschluss ist nicht sichtbar.


Lichtschwertklip:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/covertec.jpg
Benötigte Details:
    - Goldener Schwertklip auf der linken Seite des Gürtels.
    - Die Befestigung muss versteckt sein.


Hose:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/GRNA12.jpg
Benötigte Details:
    - Hellgraue gerade geschnittene Hose.
    - Stark sichtbare, schwarze
    Light grey, straight cut pants
    - Gut sichtbare schwarze Rechtecknaht an der Vorderseite der Hose.
    - Keine Sporthose oder weite Hose


Stiefel:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/beinschienen.jpg
Benötigte Details:
    - Hellgraue Leder- oder Kunstlederstiefletten (bis zum Knöchel reichend)
    - Runde Schuhspitze mit zwei kleinen schwarzen Streifen, wo die Zehen abgebogen werden.
    - Keine sichbaren Verschlüsse oder elastischen Verschlüsse.
    - Zippverschlüsse an der Innenseite der Stiefletten sind erlaubt.

Optionale Details:
    - Kniehohe Stiefel in der selben Ausführung wie die Stiefletten.


Schienbeinschutz:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/beinschienen.jpg
Benötigte Details:
    - Grauer runder Schienbeinschutz aus hartem Material (Plastik, Metall, etc..)
    - Eng anliegend mit einer sichbaren schwarzen Linie und zwei schmalen rechtecken vorne.
    Round Grey shin armor is made of hard material (plastic, metal, etc.).
    - Umriss des Schienbeinknochens, der bis zur Rückseite des Beines reicht und vorne wieder stoppt.
    - Der Schienbeinschutz kann aus zwei Schalen bestehen muss aber eng zusammen montiert werden.

Optionale Details:
    - Die Rückseite der Waden kann mit Vertiefungen versehen sein, um akkurater auszusehen.


Lichtschwert:
http://www.kjo.rebellegion.com/wp-content/uploads/2018/06/lightsaber.jpg
Benötigte Details:
    - Akkurates SW-Rebels Temple Guard Lichtschwert.
    - Doppel- oder Einzelklinge.
    - Wenn eine Klinge befestigt ist muss sie gelb sein.
    - Aus hartem Material gemacht (Plastic, Metall, etc.

Optional Details:
    - Die Klappfunktion muss nicht funktionell sein.
    - Das Doppellichtschwert kann sich mit einem Soundeffekt teilen.
    - Andere Lichtschwerter können modifiziert werden um dem Lichtschwert zu ähneln.


Kostümresourcen:
- Referenz Fotogallerie - http://www.kjo.rebellegion.com/?portfolio=temple-guard-rebels

Autor:
Uscgguardian (Matthew Creech)

Übersetzer:
Leroni

_________________
KJO DMO 2018-2019
KJO DXO 2016-2018
LCJ Support Staff 2016/2017
KJO DMerchOr 2015/2016
Wretched Hive DMerchO 2014/2015
Twilek - Saga

Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Rebel Legion Forum Index -> Costume and Prop Making -> Jedi -> KJO Standards Development -> KJO Standards Archive All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can post calendar events in this forum
The Rebel Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred volunteer Rebel costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © 2018 Lucasfilm Ltd. & ™ All rights reserved. Used under authorization.


Powered by phpBB © 2001, 2005 phpBB Group