Forum and Costume Controls

   FAQFAQ  SearchSearch  MemberlistMemberlist   UsergroupsUsergroups  medals.php?sid=f89d95e837d5c21c83788b02125c62fcMedals   RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in

       
REMINDER: Do not change your e-mail address yourself. Please read this first for why.

332nd Division

 
Post new topic   Reply to topic    Rebel Legion Forum Index -> Costume and Prop Making -> Clones of the Republic -> COR Standards Development -> COR New Standards In Progress
View previous topic :: View next topic  
Author Message
NavySith ()
Detachment CO
Detachment CO


Joined: 01 Aug 2011
Posts: 480
Location: Beaverton, OR
Medals: 2 (View more...)
Rebelthon2020 (Amount: 1)

PostPosted: Thu Apr 30, 2020 7:33 pm    Post subject: 332nd Division Reply with quote

Standard Name: 332nd Division
Primary Detachment: COR
Submission Date:
Existing Standard URL: None

Front Image:
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0827.jpg

Source:

Back / Second View Image:
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0832.jpg
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0834.jpg

Source: The Clone Wars, Season 7

Character Description
During the Siege of Mandalore, a new division, known as the 332nd, was formed within the 501st Battalion. These troopers repainted their helmets with distinctive orange markings in tribute to their returning commander, Ahsoka Tano. The 332nd, led by Commander Rex accompanied Ahsoka Tano to Mandalore to aid in capturing Darth Maul.
Required Items
All Armor is made of ABS/HIPS plastic or similar rigid material. EVA foam, cardboard, or similar non-rigid/soft material will not be allowed.

Helmet
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0855.jpg
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0860.jpg

• Phase II animated style helmet.
o Movie style helmets are not combined with animated armor.
• Helmet is painted matte or satin white with orange details.
• There is a Phase II style mohawk on top of the dome.
• The frown has six removed teeth spaces.
o Fine grey mesh is utilized inside the helmet to cover the open pieces of the frown.
• Ear caps are dark grey.
• There are six black vent stripes on each side of the helmet.
• Black eye lens extends down to the frown area.
o Lens obscures the wearer’s eyes.
• The face area of the helmet is painted orange.
• The front half of the mohawk and dome of the helmet are painted orange with white details similar to the facial markings of Ahsoka Tano.
o Two, symmetrical white diamonds are present on the forehead just above the bottom edge of the mohawk.
o Angular white markings are present above the brow line of the helmet and extend to a point over the dome, along the sides of the fin.
• Indented helmet band wraps around the back of the dome.
• Orange areas are weathered with various scuff marks and fading.
o Scuff marks expose the underlying white paint.
Armor is weathered with shades of grey.

Neck Seal

• Neck seal is black in color with no ribbing.
• No logos or labels are visible.
o If the seal is not incorporated as part of the under suit, a balaclava or other similar covering is acceptable.
OPTIONAL
• Neck seal closes in the front via (2) small black snaps.

Under Suit

Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.
Shoulder Armor
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0845.jpg

• Phase II animated style shoulder armor.
• Armor is painted matte or satin white with blue details.
• Shoulders have all rounded edges.
• Shoulder armor is not symmetrical.
o The shoulders slightly curve back at the bottom.
• Blue areas are weathered with various scuff marks and fading.
o Scuff marks expose the underlying white paint.
Armor is weathered with shades of grey.
Upper Arm Armor
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0845.jpg

• Phase II animated style upper arm armor.
• Armor is painted matte or satin white.
• Armor is cylindrical with no rear indent.
• Armor is seamless.
o No visible traces of how the armor was assembled are shown.
Armor is weathered with shades of grey
Elbow Armor
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0845.jpg

• Phase II animated style elbow armor.
• The elbow armor is detached from the forearm.
• Elbow armor sits flush with the forearm armor.
• Armor is attached to the wearer with a black elastic strap or similar method.
Armor is weathered with shades of grey.
Forearm Armor
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0845.jpg

• Phase II animated style forearm armor.
• Armor is painted matte or satin white with blue details.
• Painted around each wrist is a blue stripe.
o Blue paint overlays the white paint at the affected part.
• Right forearm has a compad with 6 raised buttons, and a larger rectangle above them.
o A smaller raised section is closest to the elbow.
• Armor is seamless on the outside edge.
o Due to the shape of the armor, a butted seam is acceptable on the inside if required.
• Elbow plate is detached from the forearm.
• Blue areas are weathered with various scuff marks and fading.
o Scuff marks expose the underlying white paint.
• Armor is weathered with shades of grey.

OPTIONAL
o Armor is seamless.
o No visible traces of how the armor was assembled are shown.

Hand Plates
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0845.jpg

• Phase II animated style hand plates.
• Armor is painted matte or satin white.
• Hand plates are mirror images of each other.
• Hand plates have an angled peak that comes to a point over the index or middle finger, just past the main knuckle of the hand.
Armor is weathered with shades of grey.
Gloves

• Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
• Gloves cover any exposed skin.
Gloves do not show any labels or logos when the armor is worn.
Chest Armor
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0845.jpg
• Phase II animated style chest armor.
• Armor is painted matte or satin white with blue details.
• Chest armor has a blue, elongated triangle shape stripe that begins at the center of the neck and extends down the chest plate to the bottom of the breast.
o At the bottom center of the chest is a symbol consisting of a white square with a horizontal white bar just above it.
• Lower portion of the chest has a squared notch for the abdomen armor to fit into.
• Chest and back plate match together at the sides and shoulders with no open gap.
o Butted seam lines are permitted if required.
• White shoulder straps fit into the top of the chest and back.
• Blue areas are weathered with various scuff marks and fading.
o Scuff marks expose the underlying white paint.
Armor is weathered with shades of grey.
Back Armor
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0871.jpg
• Phase II animated style back armor.
• Armor is painted matte or satin white.
• Back armor has a detail plate consisting of four grey circles and five grey horizontal bars.
• Chest and back plate match together at the sides and shoulders with no open gap.
o Butted seam lines are permitted if required.
• White shoulder straps fit into the top of the chest and back.
Armor is weathered with shades of grey.
Abdomen Armor
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0845.jpg
• Phase II animated style abdomen armor.
• Armor is painted matte or satin white.
• Top edge of the armor is squared off to match the chest armor.
• The abdomen armor protrudes out in the middle to match the shape of the chest armor.
• The abdomen armor joins at the rear and the join is covered by a center plate.
Armor is weathered with shades of grey.
Codpiece and Belt front
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0845.jpg
• Phase II animated style codpiece and belt front armor.
• Armor is painted matte or satin white.
• Belt is approx. 3" tall and divided into 1.75" wide segments.
• The front segments have a key/slot detail.
• Belt boxes are mounted at the hips.
• Codpiece and Posterior armor connect at the hips.
o Butted seams are permitted at this connection if required.
Armor is weathered with shades of grey.
Posterior Armor, Belt Rear and Detonator
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0871.jpg
• Phase II animated style posterior armor, belt and detonator.
• Armor is painted matte or satin white.
• Belt is approx. 3.5 inches tall and divided into 2 and Ό inch segments.
• Cod and Posterior armor connect at the hips.
o Butted seams are permitted at this connection if required.
• Detonator is centered on the back of the belt with no control buttons.
o The detonator has two lines set in approx. 1 inch from the edges.
 Lines may be recessed or painted on.
• The center of the detonator end caps are painted grey.
• Armor is weathered with shades of grey.
OPTIONAL
o Detonator lines are recessed.
Belt Boxes
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0845.jpg
• Phase II animated style belt boxes.
• Two rectangular boxes with one mounted on each side of the belt.
• Boxes are painted matte or satin white.
o The top side of the box is tapered outward.
o There is an inset detail near the top of each box.
Armor is weathered with shades of grey.
Thigh Armor
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0845.jpg
• Phase II animated style thigh armor.
• Armor is painted matte or satin white.
• Front of thigh armor has a flat triangular area near the knee with a notch cut out for the knee armor.
• From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
• The upper outer edge has an angled section.
• Armor is weathered with shades of grey.

OPTIONAL
o Armor is seamless.
o No visible traces of how the armor was assembled are shown.
Knee Armor
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0845.jpg
• Phase II animated style knee armor.
• Armor is painted matte or satin white.
• The bottom of the knee armor has a 1" blue stripe that extends from the bottom edge.
• Two vertical, blue stripes are present on the side of the knee armor that align with the stripes of the thigh and lower leg armor.
• Knee armor is detached from the lower leg armor.
• Knee armor sits flush with the front of the lower leg armor.
• The knee armor is attached to the wearer using black elastic straps, or a similar method.

Lower Leg Armor
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0871.jpg
• Phase II animated style lower leg armor.
• Armor is painted matte or satin white.
o Blue paint overlays the white paint at the affected part.
• Knee armor is detached from the lower leg.
• The front of the armor has a triangular detail just below the knee and a hard ridge line down the front of the shin.
• Back of the lower legs have an indentation just under the calf that extends down to the ankle.
• The outside of the calf is seamless.
o A clam shell opening on the inner seam is acceptable.
• Armor is weathered with shades of grey.
OPTIONAL
o Armor is seamless with a trap door access through the indent in the rear of the lower leg.

Boots
URL: https://www.cap-that.com/starwars/clone-wars/709/1080/images/clone-wars7x09_0871.jpg
• Phase II animated style boots.
• White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
• Boots are lace-less and have flat soles.
• Boots have a center strip running from the toe to the ankle.
• A strap across the top of the foot, and 2 flat white discs on either side of the foot, terminating the strap.
OPTIONAL
o Boots have accurate notched sole.

Optional Accessories
Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.
DC-15S Blaster Carbine (animated style)

Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.
This is the animated variant of the DC-15S blaster rifle
DC-15A Blaster Rifle (animated style)

Manufactured by BlasTech Industries, this blaster is the standard issue weapon carried by the Clone Troopers of the Grand Army of the Republic.
This is the animated variant of the DC-15A blaster rifle.
Z-6 Rotary Blaster Cannon (Minigun)

Manufactured by Merr-Sonn Munitions, Inc, the Z-6 Cannon incorporates a rotary assembly of six barrels, wrapped around a coolant-lined core, providing a tremendous sustained rate of fire. Because it is large and can become unwieldy, the Z-6 is reserved for special-issue deployment and requires training to use effectively.
_________________

Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Rebel Legion Forum Index -> Costume and Prop Making -> Clones of the Republic -> COR Standards Development -> COR New Standards In Progress All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot post calendar events in this forum
The Rebel Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred volunteer Rebel costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © 2020 Lucasfilm Ltd. & ™ All rights reserved. Used under authorization.


Powered by phpBB © 2001, 2005 phpBB Group